Dell DX6000 Manual de instalação e configuração - Página 9

Procurar online ou descarregar pdf Manual de instalação e configuração para Servidor Dell DX6000. Dell DX6000 35 páginas. Rack installation instructions — static rails
Também para Dell DX6000: Manual suplementar (4 páginas), Instruções de instalação do hardware (2 páginas), Manual do utilizador (46 páginas), Manual de instalação e configuração (43 páginas), Manual de iniciação (28 páginas), Aviso (28 páginas), Aviso (20 páginas), Visão geral (19 páginas), Manual de configuração (9 páginas), Manual de configuração (9 páginas), Nota de lançamento (8 páginas), Manual de referência (12 páginas), Manual de configuração (7 páginas), Nota de lançamento (6 páginas), Nota de lançamento (5 páginas), Notas de lançamento (5 páginas), Instruções de instalação (2 páginas), Instruções de instalação (2 páginas)

is used to populate the name of the storage cluster on the admin console as well as in stream

metadata for all streams written to the local cluster. The CSN also uses this name to detect all the

nodes participating in the cluster. For all of these purposes, the name must be unique. An IANA fully

qualified domain name is recommended.

Are these values correct (yes/no)? This last step allows you to review the values entered

for all prompts before submitting them. Answering yes will allow the initial configuration process to

proceed with network and service configuration, resulting in a fully functional CSN. Answering no to

the final initial configuration prompt will restart the initial configuration script at the first prompt, with

the previously entered values populated.

At the completion of a successful initial configuration, the CSN will immediately reboot the server

to initialize all services. When the node comes back up all network services will be configured

and available including SNMP, syslog, DHCP, DNS, NTP, and firewall. Additionally, the CSN

Console will be available, the SCSP Proxy will be configured and started and the DX Content Router

Publisher will be configured and started.

2.3.2. Secondary CSN Configuration

Once a Primary CSN has been configured on the network, a Secondary CSN may also be

configured. The Secondary only requires entry of a single unique external IP address and

identification of the internal interface that is already defined on the Primary. The Secondary will then

pull much of its network configuration data from the Primary. To facilitate this, a one-time use of the

Primary's root password is required as follows:

Additional information about the network will be obtained from the

primary CSN

Please enter the primary csn root password []:

Please re-enter the primary csn root password []:

Taken from the confirmation at the end of the initial configuration script, the Secondary configuration

parameters are simply:

Primary: no

External CSN IP address: 192.168.66.11

Internal network interface: 172.20.20.0

Are these values correct (yes/no)?

Subsequent to rebooting after configuration and prior to booting any storage cluster nodes, an

aggregate license file comprised of any capacity keys included with your hardware or sent by your

hardware manufacturer must be entered and published via the administrative CSN Console. The

console allows web-based configuration of all CSN services after the initial network configuration.

Please reference subsequent chapters for a full overview of console capabilities.

To access the console initially for license publication, enter the following

<CSNExternalIP>:8090

username for the console is 'admin' and the default password is 'dell'. Once authenticated, click on

the Licensing link under the Content Storage tab to access the licensing interface.

. You will be required to authenticate prior to being granted access. The

address:http://

Version 2.0

December 2010