Dell E45S003 Manual de referência - Página 16

Procurar online ou descarregar pdf Manual de referência para Servidor Dell E45S003. Dell E45S003 23 páginas.

Imprimir página

Serial Communication

To view the Serial Communication screen, power on the system, press F2, and click System Setup Main Menu > System

BIOS > Serial Communication.

Table 18. Serial Communication details

Option

Serial Communication

Serial Port Address

External Serial Connector

Failsafe Baud Rate

Remote Terminal Type

Redirection After Boot

System Profile Settings

To view the System Profile Settings screen, power on the system, press F2, and click System Setup Main Menu > System

BIOS > System Profile Settings.

Table 19. System Profile Settings details

Option

System Profile

Pre-operating system management applications

Description

Selects serial communication devices (Serial Device 1 and Serial Device 2) in

BIOS. BIOS console redirection can also be enabled, and the port address can

be specified. This option is set to Auto by default.

Enables you to set the port address for serial devices. This option is set to

Serial Device1=COM2, Serial Device 2=COM1 by default.

NOTE:

feature. To use console redirection by SOL, configure the same port

address for console redirection and the serial device.

NOTE:

setting that is saved in iDRAC. The serial MUX setting can independently

be changed in iDRAC. Loading the BIOS default settings from within the

BIOS setup utility may not always revert the serial MUX setting to the

default setting of Serial Device 1.

Enables you to associate the External Serial Connector to Serial Device 1,

Serial Device 2, or the Remote Access Device by using this option. This

option is set to Serial Device 1 by default.

NOTE:

To use console redirection by SOL, configure the same port address for

console redirection and the serial device.

NOTE:

setting saved in iDRAC. The serial MUX setting can independently be

changed in iDRAC. Loading the BIOS default settings from within the BIOS

setup utility may not always revert this setting to the default setting of

Serial Device 1.

Specifies the failsafe baud rate for console redirection. The BIOS attempts to

determine the baud rate automatically. This failsafe baud rate is used only if

the attempt fails, and the value must not be changed. This option is set to

115200 by default.

Sets the remote console terminal type. This option is set to VT100/VT220 by

default.

Enables or disables the BIOS console redirection when the operating system is

loaded. This option is set to Enabled by default.

Description

Sets the system profile. If you set the System Profile option to a mode other than Custom,

the BIOS automatically sets the rest of the options. You can only change the rest of the

options if the mode is set to Custom. This option is set to Performance Per Watt (OS) by

default. Other options include Performance and Custom.

You can use only Serial Device 2 for the Serial Over LAN (SOL)

Every time the system boots, the BIOS syncs the serial MUX

Only Serial Device 2 can be used for Serial Over LAN (SOL).

Every time the system boots, the BIOS syncs the serial MUX