DH Lifelabs CAHP-20XX01C Manual de instruções - Página 6

Procurar online ou descarregar pdf Manual de instruções para Filtro de ar DH Lifelabs CAHP-20XX01C. DH Lifelabs CAHP-20XX01C 10 páginas.

Imprimir página

Using Wi-Fi & DH Lifelabs App

(only apply to CAHP-20XX01C Wi-Fi Enabled model)

Sciaire Mini + HEPA can connect with your smart device when you

download the DH Lifelabs App. Follow the steps below and/or in the

App.

1. On your smartphone, install DH Lifelabs app and turn your

Bluetooth function on.

2. Turn the device on.

3. Open DH Lifelabs app and add the device.

4. When the app indicates, press and hold the Wi-Fi Indicator for 3

seconds.

5. The app should connect to the device over your Wi-Fi network and

the Wi-Fi Indicator will illuminate amber.

To disconnect from the network, press the Wi-Fi Status Indicator/

Button. The unit will beep and the indicator will flash red.

Using the Schedule Function

NOTE: The Schedule function is only available on the CAHP-20XX01C (Wi-Fi enabled)

model via the DH Lifelabs App.

Using the DH Lifelabs App operation you can set up a schedule to turn the Sciaire Mini

+ HEPA on or off time (like an alarm clock) in advance. You can also set up the desired

operating mode including, fan speed, plasma on/off function or sleep mode. For example,

if you set the machine on at 22:30 in sleep mode, it will be turned on immediately at 22:30

at night and enter sleep mode.

Voice Control

Use the DH Lifelabs app to connect your voice equipment for the control, following the

instruction codes your voice equipment have. Works with Google Home or Amazon Alexa.

Filter Replacement

3-in-1 HEPA Filter Replacement

The filter should be replaced every 12 months or whenever indicated by the red

illuminated on the Filter Replacement Indicator on the Control Panel. However this

interval is intended as a guideline only. In environments with a high concentration of

contaminants such as dust, pet dander, or cigarette/cigar smoke you may need to replace

the filter more frequently.

NOTE: The HEPA filter is not washable. DO NOT immerse it in water.

DH Lifelabs App

GET IT ON

Make sure the Purifier is OFF and unplugged.

Detach and remove the magnetic bottom cover from the unit.

Remove using the pull tabs and replace the replacement 3-in-1 HEPA filter into the

Purifier main body.

NOTE: Ensure that the pull tabs are facing outward to facilitate filter

removal later.

Inspect the screen on the bottom cover and if necessary clean any excess dust or

dirt from the screen using a hand held vacuum.

Replace the bottom cover by placing the bottom cover into the slots on the unit.

Gently push the top of the bottom cover into place.

Turn on the Purifier. After replacing the filter, press and hold the Filter Replacement

Button for 3 seconds to reset the filter life countdown.