Dell E67S Manual de referência - Página 18

Procurar online ou descarregar pdf Manual de referência para Servidor Dell E67S. Dell E67S 22 páginas.

Imprimir página

Table 22. TPM 2.0 security information (continued)

Option

Description

When set to Disabled, the storage and endorsement hierarchies cannot be used.

When set to Clear, the storage and endorsement hierarchies are cleared of any values, and then reset

to Enabled.

TPM Advanced

Specifies TPM Advanced Settings details.

Settings

Table 23. System Security details

Option

AMD Dynamic Root of Trust

Measurement (DRTM)

Power Button

AC Power Recovery

AC Power Recovery Delay

User Defined Delay (60 s to 600

UEFI Variable Access

Secure Boot

Secure Boot Policy

Secure Boot Mode

Pre-operating system management applications

Description

Enable/Disable AMD Dynamic Root of Trust Measurement (DRTM)

To enable AMD DRTM, below configurations must be enabled:

1. TPM2.0 must be enabled and the hash algorithm must be set to SHA256.

2. Transparent SME (TSME) must be enabled.

3. Direct Memory Access Protection must be enabled.

Enables or disables the power button on the front of the system. This option is set to

Enabled by default.

Sets how the system behaves after AC power is restored to the system. This option is

set to Last by default.

Sets the time delay for the system to power up after AC power is restored to the

system. This option is set to Immediate by default.

Sets the User Defined Delay option when the User Defined option for AC Power

Recovery Delay is selected.

Provides varying degrees of securing UEFI variables. When set to Standard (the

default), UEFI variables are accessible in the operating system per the UEFI

specification. When set to Controlled, selected UEFI variables are protected in the

environment and new UEFI boot entries are forced to be at the end of the current boot

order.

Enables Secure Boot, where the BIOS authenticates each pre-boot image by using the

certificates in the Secure Boot Policy. Secure Boot is set to Disabled by default.

When Secure Boot policy is set to Standard, the BIOS uses the system manufacturer's

key and certificates to authenticate pre-boot images. When Secure Boot policy is set to

Custom, the BIOS uses the user-defined key and certificates. Secure Boot policy is set

to Standard by default.

Configures how the BIOS uses the Secure Boot Policy Objects (PK, KEK, db, dbx).

If the current mode is set to Deployed Mode, the available options are User Mode and

Deployed Mode. If the current mode is set to User Mode, the available options are

User Mode, Audit Mode, and Deployed Mode.

Table 24. Secure Boot Mode

Options

Descriptions

User Mode

In User Mode, PK must be installed, and BIOS performs signature

verification on programmatic attempts to update policy objects.

The BIOS allows unauthenticated programmatic transitions between

modes.

Deployed

Deployed Mode is the most secure mode. In Deployed Mode, PK

Mode

must be installed and the BIOS performs signature verification on

programmatic attempts to update policy objects.

Deployed Mode restricts the programmatic mode transitions.