Dell Force10 S2410-01-10GE-24P Manual de início rápido - Página 12
Procurar online ou descarregar pdf Manual de início rápido para Servidor Dell Force10 S2410-01-10GE-24P. Dell Force10 S2410-01-10GE-24P 31 páginas. Installing the s2410 system
Também para Dell Force10 S2410-01-10GE-24P: Nota de aplicação (6 páginas), Manual (42 páginas)
Imprimir página
No portion of the back shell nor any latching mechanism on the diminutive side
of the trapezoidal CX4 connector nozzle shall extend more than 0.230 inches
from the connector centerline parallel to that side. No portion of the back shell
nor any latching mechanism on the opposite side of the trapezoidal connector
nozzle shall extend more than 0.375 inches from the connector centerline
parallel to that side. No portion of the back shell nor any latching mechanism
shall extend more than 0.0495 inches from the centerline of the connector
centerline perpendicular to the long axis of the trapezoidal nozzle.
Accessing XFP Ports
Dell Force10 offers various types of XFP transceivers. For details, see:
http://www.force10networks.com/products/specifications.asp
All ports in the S2410P use XFP transceivers except the dedicated Ethernet
Management port, and the S2410CP includes four XFP ports. The XFP
transceiver (not included in the S2410 chassis shipping box) is a small
rectangular module that you insert into the port and into which you insert an
optical cable. Each XFP contains two fiber optic leads. XFPs are hot-insertable
and swappable.
CAUTION: Electrostatic discharge (ESD) damage can occur if components
are mishandled. Always wear an ESD-preventive wrist or heel ground strap
when handling the S2410 and its components.
WARNING: Do not look directly into an optical port, which could result in
physical harm.
8
Installing the Hardware