Dell M3UX16 Manual de iniciação - Página 16

Procurar online ou descarregar pdf Manual de iniciação para Servidor Dell M3UX16. Dell M3UX16 32 páginas. Servers for sap hana

4. Check remote access to the Hardware Console:

a. If the mainboard Ethernet port is connected to a computer for local configuration, connect it to the LAN.

b. Open a Web browser and enter the IP address that has just been configured. If the Hardware Console is accessed

correctly, the Authentication page opens.

Test LAN connections

About this task

Use a remote workstation that is connected to the same network to test the LAN connections with the ping command.

Steps

1. Click Start > Run and type cmd to open a command window.

2. Enter ping <IP_address>, where <IP_address> is the IP address of the server that has just been configured with the

psetup (Windows) tool or mc-setup (Linux) tool.

Steps

1. Open a shell command window.

2. Enter ping <IP_address>, where <IP_address> is the IP address of the server that has just been configured with the

psetup (Windows) tool or mc-setup (Linux) tool.

About this task

For each server module, perform the following steps:

Steps

1. Press the power button on the MRB.

Figure 16. Power button - front view

2. After a few seconds, check that the LED on the power button is on and green.

Connecting the Server