Cradlepoint AP22 Manual de início rápido - Página 2

Procurar online ou descarregar pdf Manual de início rápido para Ponto de acesso sem fios Cradlepoint AP22. Cradlepoint AP22 4 páginas. Wifi access point

Imprimir página
Quick Start Guide
/
AP22
Device Details
2
Model / Regulatory Numbers:
AP22-US
S5A750A
AP22-CA
S5A750A
AP22-EU
S5A750A
Getting Started
Setting Up the Access Point
1.
Connect the AP22 to a PoE-capable device. The Cradlepoint AP22 can be powered using PoE
(802.3af) or PoE+ (802.3at). Connect the AP22 to a PoE-capable device to power on the access
point. When the AP22 powers up, it will attempt to obtain an IP address via DHCP from the
connected device. If the AP22 does not receive an IP address via DHCP within 60 seconds, it will
utilize its "Static Fallback" address. By default, this address is "192.168.0.1."
2.
Connect to the AP's SSID. Connect wirelessly to the WiFi network using
the default SSID and Passphrase. The default WiFi network name is "AP22-
xxx," where "xxx" is the last three characters of the SSID found on the
product label on the bottom of the device. To connect to the WiFi, enter
the Default Password when prompted, also provided on the product label.
Note: The product label shown at right is an example only—your Default
Password and SSID will be unique.
3.
Mounting the AP. The AP22 comes with two mounting brackets: a ceiling mounting bracket, for
affixing the AP to ceiling-grid rail adapters for flat rails, and a universal mounting bracket that
can be screwed into a solid surface to mount the AP.
©Cradlepoint. All Rights Reserved.
|
+1.855.813.3385
|
cradlepoint.com