Dell PowerEdge 4220 Manual - Página 6

Procurar online ou descarregar pdf Manual para Servidor Dell PowerEdge 4220. Dell PowerEdge 4220 8 páginas. Rack enclosures
Também para Dell PowerEdge 4220: Manual (20 páginas), Manual (20 páginas), Manual (17 páginas), Manual (12 páginas), Manual (10 páginas), Manual (10 páginas), Manual (9 páginas), Manual (9 páginas), Manual (10 páginas), Manual (12 páginas), Manual (12 páginas), Manual (11 páginas), Especificações (2 páginas), Manual técnico (37 páginas), Manual de configuração rápida (2 páginas)

Cable Routing Procedures for Dell™ PowerEdge™ T610 Systems

5. Clip off the excess length of material from the tie wraps. Make sure that the heads of the tie wraps

are positioned so as to avoid interference with adjacent systems. Return the CMA to the closed

(retracted) position.

6. Extend the system out of the rack to verify that there is sufficient slack in the cables on both ends

of the CMA.

See Figure 4 for an example of a completed right-side mounted CMA installation.

See Figure 5 for an example of a completed left-side mounted CMA installation.

Figure 3: Routing the Cables Through the CMA

Figure 4: Right-Side Mounted CMA Installation (Preferred)

NOTE: Do not store excess cable

slack inside the CMA. The cable may

protrude through the CMA, thus

causing binding and potentially

damaging the cable.

Cables entering the CMA should have

a small amount of slack to avoid cable

strain when the CMA is extended.

KVM dongle placed inside the basket.

Page 4