Dell PowerEdge R420 Manual - Página 11

Procurar online ou descarregar pdf Manual para Servidor Dell PowerEdge R420. Dell PowerEdge R420 11 páginas. 2-socket 1u rack server
Também para Dell PowerEdge R420: Manual de instalação (8 páginas), Manual de iniciação (9 páginas), Características (2 páginas), Manual da carteira (27 páginas), Manual técnico (49 páginas)

Cable Routing Procedures for Dell PowerEdge R320 & R420 Systems

Section 4: Cabling a PowerEdge R320 or R420 system installed

on static rails

NOTE: The CMA is compatible only with the sliding rails, not the static rails.

1. Follow the instructions contained in the Rack Installation Instructions found in the static rail kit to

install the server into a two-post or four-post rack.

2. Install the hook-and-loop straps provided in the rail kit through the slots in the rear brackets of the

rails as described in the Rack Installation Instructions.

3. Connect all applicable cables to the rear of the system and verify that all connections are secure.

4. Using the hook-and-loop straps, bundle the cables and secure them to either the left rail or right

rail as described in the Rack Installation Instructions. See Figure 12 for an example of data cables

secured to the left rail and power cables secured to the right rail (as viewed from the rear of the

system).

Figure 12.

Cabling a system installed in static rails