Dell PowerEdge R840 Ficha técnica de atualização do processador - Página 3

Procurar online ou descarregar pdf Ficha técnica de atualização do processador para Servidor Dell PowerEdge R840. Dell PowerEdge R840 20 páginas.

Installing the new processor and

heat sink module

WARNING: To avoid any damage to the processor, do not remove the

processor from the processor tray when the bracket and the heat sink is

attached to it.

NOTE: Before placing the bracket on the processor, ensure that pin 1

indicator

and the processor tray.

1. Flex the outer edges of the bracket around the processor ensuring that the

processor is locked into the clips on the bracket.

WARNING: Do not reuse a previously removed heat sink.

2. Remove the plastic heat sink shipping cover to expose the thermal grease

surface. Place the heat sink on the processor and push down until the

bracket locks onto the heat sink.

NOTE: Ensure that the two guide pin holes on the bracket match the guide

holes on the heat sink.

NOTE: Ensure that the pin 1 indicator on the heat sink is aligned with the pin 1

indicator on the bracket before placing the heat sink onto the processor and

bracket.

on the bracket is aligned with the pin 1 indicator on the processor