Dell PowerEdge systems 6300 Instalação do bastidor - Página 28

Procurar online ou descarregar pdf Instalação do bastidor para Servidor Dell PowerEdge systems 6300. Dell PowerEdge systems 6300 34 páginas. Systems 1 x 2 backplane
Também para Dell PowerEdge systems 6300: Informações de instalação (6 páginas), Manual de instalação (28 páginas), Instalação do bastidor (37 páginas), Manual do utilizador (42 páginas), Manual de instalação (8 páginas), Manual de instruções de instalação (12 páginas), Manual de substituição (3 páginas), Informações de instalação (6 páginas)

(Rev. 9/8/00) FILE LOCATION: S:\SYSTEMS\MARCONI\Rackingd\7U\05KCEa00\05KCEeb0.fm

Rack Installation Guide

Installing the Cable Tray

Attach the cable tray to the PowerEdge computer chassis using five 6-32 x 0.25-inch

hex-head Phillips screws (see Figure 11).

NOTICE: The cable tray and its mounting are not sturdy enough to support

the weight of the PowerEdge chassis, so do not grasp the cable tray when

lifting the system. You should lift the system only by the chassis edges.

Figure 11. Installing the Cable Tray

You can install the cable-management arm on either side of the cable tray. See the

section "Reversing the Cable-Management Arm Installation" found later in this guide.

Facing the back of the rack cabinet, attach the right-angle bracket of the cable-

management arm to the cabinet's back vertical rail and secure it with the captive

thumbscrews (see Figure 12). The bracket slides into the square mounting holes

on the vertical rail.

DELL CONFIDENTIAL - Preliminary

cable tray

6-32 x 0.25-inch hex-head

Phillips screws (5)

9/8/00