Dell E2209W Manual do utilizador - Página 21

Procurar online ou descarregar pdf Manual do utilizador para Monitor Dell E2209W. Dell E2209W 30 páginas. Dell™ e2009w/e2209w flat panel monitor user's guide
Também para Dell E2209W: Manual de configuração (2 páginas)

Imprimir página

Push

to go back to the main menu.

Horizontal Position

Use the

and

NOTE:

When using a DVI source, the Horizontal Position setting is not available.

Vertical Position

Use the

and

NOTE:

When using a DVI source, the Vertical Position setting is not available.

Sharpness

This feature can make the image look sharper or softer. Use

he Phase and Pixel Clock adjustments allow you to adjust your monitor to your preference.

Pixel Clock

Use the

and

If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock (coarse) adjustment and then use Phase (fine), again.

Phase

NOTE:

Pixel Clock and Phase Adjustments are only available for "VGA" input.

Reset the image to the original factory setting.

Display Reset

Exit Menu

Push

to exit the OSD main menu.

OTHER

SETTINGS

Back

Push

to go back to the main menu.

Language option to set the OSD display to one of seven languages (English, Espanol, Francais, Deutsch, Brazilian Portuguese, Japanese, or Simplified

Language

Chinese).

This function is used to change the OSD background from opaque to transparent.

Menu Transparency

OSD Hold Time: Sets the length of time the OSD will remain active after the last time you pressed a button.

Menu Timer

Use the

and

Menu Lock

Controls user access to adjustments. When 'Lock' is selected, no user adjustments are allowed. All buttons are locked except

NOTE:

When the OSD is locked, pressing the menu button will take the user directly to the OSD settings menu, with 'OSD Lock' pre-selected on entry.

Press and hold

DDC/CI

DDC/CI (Display Data Channel/Command Interface) allows your monitor parameters (brightness, color balance etc) to be adjustable via software on your

PC. You can disable this feature by selecting "Disable".

You can disable this feature by selecting Disable. The following warning message appears:

Select Yes to disable DDC/CI and No to exit with out making changes.

buttons to adjust image left and right. Minimum is '0' (-). Maximum is '100' (+).

buttons to adjust image up and down. Minimum is '0' (-). Maximum is '100' (+).

buttons to adjust for best image quality.

buttons to adjust the slider in 1 second increments, from 5 to 60 seconds.

button for 15 seconds to unlock and allow user access to all applicable settings.

to adjust the sharpness from '0' to '100'.

button.