Allied Telesis Switchblade AT-x908 Manual de configuração do software
Procurar online ou descarregar pdf Manual de configuração do software para Software Allied Telesis Switchblade AT-x908. Allied Telesis Switchblade AT-x908 16 páginas. Advanced layer 3 modular switch
Também para Allied Telesis Switchblade AT-x908: Visão geral (1 páginas), Brochura (12 páginas), Brochura (8 páginas), Ficha de dados (10 páginas)
AlliedWare Plus
How To |
Configure QoS on x900-24, x900-12, and
SwitchBlade x908 Series Switches
Introduction
This document describes some generic configuration examples for Quality of Service (QoS)
on the AlliedWare Plus OS.
What information will you find in this document?
This document provides information in the following sections:
•
1. Setting the egress rate‚ on page 2
•
2. Setting the priority on a packet‚ on page 7
•
3. Setting the egress queues‚ on page 10
•
Full QoS scenario - tiered services for a single customer‚ on page 13
Which product and software version does this information apply to?
This How To Note applies to the following Allied Telesis switches, running the
AlliedWare Plus OS software version 5.2.1 or later:
•
SwitchBlade x908
•
x900 series
C613-16112-00 REV A
TM
OS
www.alliedtelesis.com