Dell UltraSharp UP3218K Manual de serviço - Página 9

Procurar online ou descarregar pdf Manual de serviço para Monitor Dell UltraSharp UP3218K. Dell UltraSharp UP3218K 14 páginas.
Também para Dell UltraSharp UP3218K: Manual do utilizador (50 páginas), Manual de início rápido (2 páginas), Manual de início rápido (2 páginas), Manual de desmontagem (6 páginas)

U se a Philips-head screwdriver to tighten eight

screws for locking the middle iron bezel with the

panel module. Connect the function key cable to the

connector, then fix the function key cable with

S10

adhesive tapes which sticked on the back of the

cable. Stick three pieces of VBH tape on the specific

position as the picture below shown.

(No.1~8 Screw size=M3x0.5xL4, Torque=4±0.5kgfxcm)

VBH tape

Take a pair of speakers, locate the speakers to the

holders, then use a Philips-head screwdriver to

tighten four screws for locking the speakers, then

S11

connect the speakers' cable to the connector, then

stick a piece of aluminum foil to fix the cable.

(No.1~4 Screw size=M2x6, Torque=3.5~4kgfxcm)

aluminum foil

4. Disassembly and Assembly Procedures

VBH tape

Assemble a protective cover with the middle iron

bezel to cover the speakers, then

screwdriver to tighten 3 screws for locking the

protective cover with the bezel

S12

cable to connect the panel and power board, settle

the cables as the picture below shown.

pieces of aluminum foil on the specific position to

cover the cables and connectors.

(No.1~3 Screw size=M3x4, Torque=3.5~4.5kgfxcm)

Take a middle plastic bezel, then assemble the

middle bezel with the whole unit, adjust the bezel for

the two parts firmly attached. Use a Philips-head

S13

screwdriver to tighten 14 screws for locking the

middle plastic bezel with the whole unit.

(No.1~14 screw size=M3x5.5, Torque=4

use a Philips-head

. Take a long lamp

Stick 7

0.5kgfxcm)