Dell BOSS-N1 Manual do utilizador - Página 27
Procurar online ou descarregar pdf Manual do utilizador para Armazenamento Dell BOSS-N1. Dell BOSS-N1 36 páginas. Boot optimized storage solution-n1
Imprimir páginaImport and set a foreign virtual disk as BOSS-N1
About this task
The Import operation sets a foreign virtual disk as native to the configuration.
Steps
1. Enter the UEFI Configuration Utility. See
2. Click Virtual disk information.
3. Select the virtual disk.
4. Select Yes for the option Would you like to import this virtual disk?.
NOTE:
This option is only available when the controller detects a foreign disk.
5. Click OK, and then click Import.
6. Click Back untill you return to the screen.
7. Click Finish, and then click Yes to save the settings.
Create a virtual disk
You can create only one virtual disk.
About this task
To create a virtual disk, perform the following steps:
Steps
1. Enter the UEFI Configuration Utility. See
2. Click Create RAID Configuration.
3. Select the hard drives.
NOTE:
BOSS supports only single drive RAID 0.
4. Click Go to RAID Configuration.
5. Select various options based on the user's need and type the Name of the virtual disk.
NOTE:
Adding special characters in the virtual disk name is not supported.
6. Select Yes for the option Would you like to create this virtual disk? and click OK.
7. Click Accept.
A virtual disk is created with quick initialization by default.
Delete a virtual disk
About this task
To delete a virtual disk, perform the following steps:
Steps
1. Enter the UEFI Configuration Utility. See
2. Click Delete RAID configuration.
3. Select the virtual disk.
4. Select Yes for the option Are you sure you want to delete the selected Virtual Disk?.
5. Click OK, and click Accept to delete the selected virtual disk.
Enter the UEFI Configuration
Enter the UEFI Configuration
Enter the UEFI Configuration
Utility.
Utility.
Utility.
BOSS-N1 Configuration Utility
27