Dell PowerVault 56F Manual do utilizador - Página 41

Procurar online ou descarregar pdf Manual do utilizador para Armazenamento Dell PowerVault 56F. Dell PowerVault 56F 42 páginas. Dell powervault 56f switches rack installation guide
Também para Dell PowerVault 56F: Manual do utilizador (6 páginas), Manual de ligação (38 páginas), Manual de instalação (8 páginas), Manual de instalação do bastidor (28 páginas)

Dell PowerVault 56F Manual do utilizador
support.dell.com
The following list defines or identifies
technical terms, abbreviations, and acro-
nyms used in Dell™ user documents.
A fabric software facility that supports
multicast group management.
The FC Arbitrated Loop (FC-AL) is a stan-
dard defined on top of the FC-PH
standard. It defines the arbitration on a
loop where several FC nodes share a com-
mon medium.
In Class 2 service, the fabric and destina-
tion N_Port provide connectionless
service with notification of delivery or non-
delivery between the two N_Ports.
Class 3 service provides connectionless
service without notification of delivery be-
tween N_Ports. The transmission and
routing of Class 3 frames is the same as
for Class 2 frames.
A class of service used for interswitch
control traffic. It provides connectionless
service with notification of delivery or non-
delivery between two E_Ports.
An SNMP community is a relationship be-
tween an SNMP agent and a set of SNMP
managers that defines authentication, ac-
cess control, and proxy characteristics.
Credit, applied to a switch, is a numeric
value that represents the maximum num-
ber of receive buffers provided by an
F_Port or FL_Port to its attached N_Port
or NL_Port respectively such that the
N_Port or NL_Port may transmit frames
without overrunning the F_Port or
NL_Port.
The domain number uniquely identifies
the switch in a fabric. This switch domain
ID is normally automatically assigned by
the switch and may be any value between
0 and 31. This number may also be as-
signed manually.
E_D_TOV (Error-Detect Time-Out Value)
defines the time the switch waits for an
expected response before declaring an er-
ror condition. The error detect time out
value is adjustable in 1 ms increments
from two seconds up to 10 seconds.
A port is designated an E_Port when it is
used as an interswitch expansion port to
connect to the E_Port of another switch
to build a larger switch fabric.
The name applied to a network resulting
from the interconnection of switches and
devices by interswitch links (ISLs). A fab-
ric is an active, intelligent, nonshared
interconnect scheme for nodes.
Glossary
1