Dell PowerVault MD3060e Series Manual do Administrador - Página 16

Procurar online ou descarregar pdf Manual do Administrador para Armazenamento Dell PowerVault MD3060e Series. Dell PowerVault MD3060e Series 48 páginas. Storage enclosure
Também para Dell PowerVault MD3060e Series: Manual de hardware e software (25 páginas), Manual de instalação (11 páginas), Manual de iniciação (10 páginas), Atualização da informação (8 páginas), Instruções de instalação do bastidor (2 páginas), Configuração (2 páginas), Manual de implantação (24 páginas), Manual do Administrador (35 páginas), Manual de iniciação (10 páginas), Manual de implantação (24 páginas), Manual do Proprietário (40 páginas), Configuração (2 páginas)

Drive OS Path

Managing your storage enclosure

To keep the EMM firmware and drives up-to-date, there are specific commands you must run and

procedures you must complete. There are key commands that display crucial information required for

other command to be run properly.

NOTE: Ensure the console window is able to fit at least 150 characters for each line to view the

output properly.

NOTE: The output screenshots shown in the following procedures are examples and may be slightly

different from the actual output depending on the version of your Server Hardware Management

Software.

Many secli commands require a respective adapter as an input parameter. To get the proper values for

this parameter, run the following command:

secli list adapters

The following output is displayed:

Note and record the values displayed in the Adapter# column, because this represents the Adapter

Index and also the WWID/SASAddresses column for the respective supported HBAs.

Identifying enclosures

For other management actions, you must provide information about a respective enclosure or EMM.

These values are presented with respect to a specific adapter value provided.

To identify the attached enclosures to a specific adapter, run the following command:

secli list enclosures

Output

For enclosures:

Description

Unique path to drive provided by the OS.

-a=<(SASAddress | AdapterIndex)>

Valid for Parameter

Valid for -d