Dell PowerVault MD3060e Series Manual do Administrador - Página 6

Procurar online ou descarregar pdf Manual do Administrador para Armazenamento Dell PowerVault MD3060e Series. Dell PowerVault MD3060e Series 48 páginas. Storage enclosure
Também para Dell PowerVault MD3060e Series: Manual de hardware e software (25 páginas), Manual de instalação (11 páginas), Manual de iniciação (10 páginas), Atualização da informação (8 páginas), Instruções de instalação do bastidor (2 páginas), Configuração (2 páginas), Manual de implantação (24 páginas), Manual do Administrador (35 páginas), Manual de iniciação (10 páginas), Manual de implantação (24 páginas), Manual do Proprietário (40 páginas), Configuração (2 páginas)

Introduction

CAUTION: See the Safety, Environmental, and Regulatory Information document for important

safety information before following any procedures listed in this document.

An enclosure containing physical disks accessed through EMMs (Enclosure Management Modules) is

called a storage enclosure. A storage enclosure includes various hardware components, such as physical

disks, EMMs, fans, and power supply units (PSUs).

One or more host servers attached to the storage enclosure can access the data on the storage

enclosure. You can also establish multiple physical paths between the hosts and the storage enclosure so

that loss of any single path (for example, through failure of a host server port) does not result in loss of

access to data on the storage enclosure.

The storage enclosure is managed by the Dell Storage PowerTools Server Hardware Manager (SHM)

software running on a host server. On the host server system, the management software and the storage

enclosure communicate management requests and event information by using in-band SAS connections.

Terminology

This document familiarizes you with the functions of the SHM software. The software is comprised of two

major components:

•

Storage Enclosure CLI (secli) — This component provides a command line interface (CLI) used to

obtain device and status information of storage enclosure components. Also, the secli is used for

firmware update of Enclosure Management Modules (EMMs) and hard drives and solid-state drives

(SSDs) within the enclosure.

•

Server Hardware Manager Monitor — This component runs continuously, monitoring and logging the

status of enclosure components, including EMMs, drives, PSUs, and fan modules.

The document is organized into two major sections. The first section of this document describes the CLI

commands required to perform certain common task within the storage enclosure. The second section is

a reference to all CLI commands ordered by type.

WARNING: See the safety and regulatory information that shipped with your system. Warranty

information may be included within this document or as a separate document.

NOTE: All the documents, unless specified otherwise, are available at Dell.com/dsmsmanuals.

Before you begin, ensure that you have the following documentation: