Dell PowerVault NX3000 Manual do Administrador - Página 42

Procurar online ou descarregar pdf Manual do Administrador para Armazenamento Dell PowerVault NX3000. Dell PowerVault NX3000 50 páginas. Document
Também para Dell PowerVault NX3000: Manual de atualização (32 páginas), Manual de resolução de problemas (17 páginas), Configuração (2 páginas), Especificações (2 páginas)

6 Click File Screening ManagementFile Screens.

7 Either right-click or use Create File Screen option from the right pane.

8 Follow the wizard, select the path (volume or folder in which you want to

create the file screen), select your preferred File Screen Properties and

click Create.

The newly-created file screen is displayed in the central pane.

9 Select any of the existing file screens and right-click or use the options in

right-most panes to change the file screen properties.

Creating a New Volume

Perform the following configuration steps.

NOTE:

Backup Operator or Administrator is the minimum membership required to

perform this configuration.

1 From your NAS system or remote desktop, open disk management, select

the Rescan Disks option.

The central pane lists the LUNs of storage located on your NAS system.

NOTE:

Unknown and Offline.

2 Select the Disk, right-click, and select the Online option.

Now the disk is seen as Unknown and Not Initialized.

3 Select the Disk, right-click, and select the Initialize Disk option. In the

Initialize Disk dialog box, select the disk(s) to initialize.

A pop-up window to select the partition style for the selected disks is

displayed with the following options:

MBR (Master Boot Record)

GPT (GUID Partition Table)

4 Select a partition style and click OK.

NOTE:

5 In the middle pane, select the disk and run the New Simple Volume...

wizard.

Using Your NAS System

The default status for the newly-created LUN in Disk management is

The disk is initialized as a basic disk.