Dell PowerVault TL4000 Manual de configuração - Página 11

Procurar online ou descarregar pdf Manual de configuração para Armazenamento Dell PowerVault TL4000. Dell PowerVault TL4000 22 páginas. Tape library
Também para Dell PowerVault TL4000: Notas de lançamento (3 páginas), Começar a trabalhar (38 páginas), Perguntas frequentes (26 páginas), Manual de início rápido (7 páginas), Manual do software (16 páginas), Manual de informações importantes (10 páginas), Adenda ao Manual do Utilizador (2 páginas), Manual de iniciação (3 páginas), Instruções de anexação (17 páginas), Brochura (4 páginas), Manual do utilizador (20 páginas)

Dell PowerVault™ TL4000/TL2000 Failover Guide

Single FC Drive Failover configuration

(Two HBA adapters, One FC switch, and one FC drive)

Main Path

LT05 Specific Requirements For Failover Support

The introduction of LT05 drive support in the Dell PowerVault™ TL2000 and TL4000 allowed additional

failover configurations. These configurations are unique to the Dell PowerVault™ TL2000 and TL4000

configured with LT05 devices and do not extend to LT04 configurations.

Important Note: Failover is only supported on Dell PowerVault™ TL2000 when configured with LT05

drives

Failover Reference Configuration 8:

One host with two Fibre Channel ports, one Fibre Channel switch, and a Dell PowerVault™

configured with three Fibre Channel drives

In this configuration, failover occurs if one or more of the following occurs:

‐ One of the drives fails (hardware failure or is drive disconnected from the HBA port)

‐ One of the Fibre Channel ports in the HBA fails

11 | P a g e

Always refer to www.dell.com\support for latest documentation and updates

Failover Path

Figure 7: Reference Configuration 7

1 2 / 3 1 / 0 9 v e r s i o n 2 . 0