Dell PS4100 Manual de manutenção do hardware - Página 29

Procurar online ou descarregar pdf Manual de manutenção do hardware para Armazenamento Dell PS4100. Dell PS4100 47 páginas. Storage array
Também para Dell PS4100: Manual do hardware (50 páginas), Visão geral (7 páginas), Manual de instalação e configuração (41 páginas), Configuração (2 páginas)

PS4100 Hardware Maintenance Guide

2. Holding the orange button down, swing the black release latch towards you. This starts to eject the

control module from the array.

3. Place the control module on a flat surface where it will be protected from electrostatic charge. To avoid

damage, do not place anything on top of the control module.

4. If you are replacing a failed control module, remove the microSD card from the failed control module

and install it in the replacement control module. This will make sure that the new control module is

running the correct firmware. See

Caution: Do not operate an array with an empty control module slot.

Return the failed control module in the packaging in which the replacement module was shipped. Contact

your PS Series support provider for information about returning hardware.

Installing a Control Module

You can install a control module without shutting down the array.

Caution: Do not mix control module types in an array.

Control modules are installed horizontally in the array, with the Ethernet ports on the left and the serial port

on the right. See

Figure

Facing the rear of the array, the upper control module is CM0 and the lower control module is CM1.

To install a control module:

1. Attach an electrostatic wrist strap or a similar protective device. See

Figure 16 Removing a Control Module

Replacing the MicroSD Card on page

17.

Figure 17 Correct Control Module Orientation

Maintaining Control Modules

24.

Protecting Hardware on page