Dell Force10 S4810 Manual de implantação - Página 10
Procurar online ou descarregar pdf Manual de implantação para Interruptor Dell Force10 S4810. Dell Force10 S4810 36 páginas. Dell force10 s4810 switch
Também para Dell Force10 S4810: Manual de início rápido (27 páginas), Manual de configuração (17 páginas), Manual de configuração (17 páginas)
Imprimir página
Parameter Type
Parameters
Optional match fields
•
•
Mandatory actions
•
•
•
Optional actions
OFPAT_SET_VLAN is optional for OpenFlow (OF) ports and mandatory for OF virtual local area
networks (VLANs).
L2 Flows
Parameter Type
Parameters
Mandatory match
•
fields
•
Optional match fields All fields other than dl_vlan and dl_dst must be wildcards.
Mandatory actions
Single OFPAT_OUTPUT action to a switch port.
Optional actions
None.
Learning Bridge (LB) Flows
Parameter Type
Parameters
Mandatory match
•
fields
•
•
Optional match fields All fields other than the ones listed in "Mandatory match fields" must be wildcards.
Mandatory actions
Single OFPAT_OUTPUT action to a switch port.
Optional actions
None.
Max Limits
This section defines the maximum number of permitted flow types. The number of available flow types varies depending
on the type of flow.
•
You can provision up to eight OF instances on each switch.
•
The number of flows supported on each switch depends on the flow type.
10
nw_dst (dst-ip)
All fields other than the ones listed in "Mandatory match fields" and "Optional match
fields" must be wildcards.
You must specify set_dl_src (set src-mac) as the port mac (local mac) for the
swtich.
set_dl_dst (set dst-mac)
Single OFPAT_OUTPUT action to a switch port.
dl_vlan (input vlan id)
dl_dst (dst-mac)
dl_src (src-mac)
dl_dst (dst-mac)
LB flows will only be installed in the L2 table if bidirectional traffic is present.