Dell N20 Series Manual de instalação - Página 25

Procurar online ou descarregar pdf Manual de instalação para Interruptor Dell N20 Series. Dell N20 Series 48 páginas.

All manuals and user guides at all-guides.com

The USB port does not support any other type of USB device.

Reset Button

The reset button is accessed through the pinhole and allows you to perform a hard reset on the switch. To use the reset button, insert an

unbent paper clip or similar tool into the pinhole. When the switch completes the boot process after the reset, it resumes operation with

the most recently saved configuration. Any changes made to the running configuration that were not saved to the startup configuration

prior to the reset are lost.

Port and System LEDs

The I/O-side contains LEDs that indicate the status of port links, power supplies, fans, stacking, and the overall system status.

For information about the status that the LEDs indicate, see the User's Configuration Guide.

Stack Master LED and Stack Number Display

When a switch within a stack is the master unit, the stack master LED, which is labeled M, is solid green. If the M LED is off, the stack

member is not the master unit. The Stack No. panel displays the unit number for the stack member. If a switch is not part of a stack (in

other words, it is a stack of one switch), the M LED is lite, and the unit number displays.

N30xx Series PSU-Side

The following images show the PSU-sides of the N30xx switches.

Figure 14. N30xx PSU-Side

N30xx Series Overview