Dell Networking Z9500 Manual de iniciação - Página 4
Procurar online ou descarregar pdf Manual de iniciação para Interruptor Dell Networking Z9500. Dell Networking Z9500 34 páginas. Z9500 switch
Também para Dell Networking Z9500: Manual de instalação (47 páginas)
Imprimir página
Figure 1. I/O Side
Figure 2. Utility Side
1.
Fan Trays
Unpacking the Switch
The switch and its accessories are shipped in a single box. The power cords may be shipped in a separate
box. Before unpacking the switch, inspect the container and immediately report any evidence of damage.
Verify that you have received your ordered items, including the following:
WARNING: If any item is missing or damaged, contact your Dell Networking representative or
reseller for instructions.
CAUTION: Always wear an ESD-preventive wrist or heel ground strap when handling the switch
and its components. Ground yourself by using an antistatic wrist strap or other device and
connect it to the ESD grounding jack on the chassis. As with all electrical devices of this type, take
all necessary safety precautions to prevent injury when installing this system.
CAUTION: The system is packaged in one or two separate containers. Use an equipment lift or
pallet jack to lift or install the chassis. Lifting the system by its shelves will cause damage to the
chassis
•
Z9500 switch
•
Static-Rail kit (#1 and #2 Phillips and flat-tipped screwdrivers required)
4
2.
Power Supllies
Getting Started Guide