Dell POWERCONNECT 5524P Notas de lançamento - Página 9
Procurar online ou descarregar pdf Notas de lançamento para Interruptor Dell POWERCONNECT 5524P. Dell POWERCONNECT 5524P 15 páginas. Powerconnect 5500 series
Também para Dell POWERCONNECT 5524P: Manual de iniciação (20 páginas)
Imprimir página
STP frame size - STP frames had
extra padding (frame size 68 instead
of 64)
When refreshing the Switching-
>VLAN->LAG interface->Edit page
the device presents the "Port
Interface" page instead
Deletion of all Static entries in
DHCP Server page causes device to
crash
When trying to add via Web GUI
MAC ACE with broadcast MAC
address as destination address,
configuration is not accepted and
an error message is displayed
"value is an illegal unicast MAC
address"
The following is a list of issues resolved between 4.1.0.08 and 4.1.0.10 firmware release.
Description
Summer time clock with SNTP
Show Tech Support (enhancement
request)
PC5500 DVA randomly fails and
assigns clients to the guest VLAN
VLAN trunk mode Native VLAN with
IPv6
System Firmware Version 4.1.0.16
PowerConnect 5500 Series Release Notes
STP frames with extra padding are valid from
standard point of view. However – some
systems reported errors when receiving such
frames.
GUI displays wrong page
System reboots
user cannot configure via the web GUI a MAC
ACE with a broadcast as destination MAC
address
User Impact
Sometimes when working with SNTP server,
the device clock adds 2 hours instead of 1
hour in Summer Time
Request to add more info in "show tech-
support" command
Traffic from Dot1x users is not assigned to the
correct VLAN
Device crashes when defining an IPv6 enabled
VLAN as a native VLAN on a port in trunk
mode
Subject to Change Without Notice
Extra padding was removed
Issue resolved
Issue resolved
Issue resolved
Resolution
Issue resolved
The following command
outputs was added to show
Tech-supp output:
"show interface counters
errors"
"show system unit X "
"show power inline"
Issue resolved
Issue resolved
Page 6