Entdecker MT CLASSIC Manual - Página 3

Procurar online ou descarregar pdf Manual para Tenda Entdecker MT CLASSIC. Entdecker MT CLASSIC 16 páginas. Express tent

MT CLASSIC, MT PREMIUM, OCTA PRO

MANUAL

WE RECOMMEND

1. The tent is based on the scissor system. Be cautious while folding and

unfolding the frame.

2. You need at least 2 people for assembly/disassembly of the tent. Tents with

eight legs should be assembled/disassembled by 4 people.

3. For MT Premium 6 × 6 m size insert additional leg, which is included in the

accessories, in the hole of the middle mast.

4. Before disassembling the structure, it must be thoroughly cleaned. Our

company is not liable for any damage resulting from multiple assembly/

disassembly of the dirty structure.

5. Our company recommends to remove the roof each time the tent is

disassembled (does not apply tents packed in Comfort transport bags).

6. The fabric (roof and sidewalls) should be cleaned and dried before packing

it into transport bags. Our company does not bear any responsibility for

possible stains arisen as a result of storing wet or dirty fabric.

7. With recurring gusts of wind, anchoring should be checked systematically.

SAFETY

1. The express tent is not intended for use during a strong wind, blizzards, hail,

storms, etc.

2. The tent must not be left without any supervision.

3. The tents are not adapted to exploitation under snow load. One should

remove the snow gathering on the roof, if the layer of the snow is 2 cm or

higher.

4. Water lingering on the roof should be immediately removed.

5. Our company states that polyester fabrics marked with OG/FR symbol are fire

resistant and that they meet requirements of PN-EN 13501-1 norm.

6. Express tents may be used with wind up to 14 m/s (50 km/h) provided it

is protected against wind gusts as described in table no. 1 (except tents

mentioned in point 7th.). During stronger wind, it is recommended in

all cases to disassemble the tent (first remove the wall and then fold the

roof). Mechanical damage resulting from failure to follow the above

recommendations are not covered by the warranty.

7. Our company declares that the statical calculations for the MT Premium in

sizes 3 × 3 m, 3 × 4,5 m, 3 × 6 m and Octa Pro in sizes 4 × 4 m, 4 × 6 m, 4

× 8 m have been carried out according to the PN-EN 13782:2015-2007 –

„Temporary objects – Tents – Safety" norm (original calculations available

at the Manufacturer). The tents may be used with wind up to 28 m/s (100

km/h) provided it is protected against wind gusts as described in tables no. 1.

During stronger wind, it is recommended in all cases to disassemble the tent

3/16