Dell PowerConnect 8024F Notas de lançamento - Página 20
Procurar online ou descarregar pdf Notas de lançamento para Interruptor Dell PowerConnect 8024F. Dell PowerConnect 8024F 20 páginas. Upgrading from version 2.x.x.x or 3.x.x.x or 4.x.x.x or 5.x.x.x to 5.1.9.3 firmware
Também para Dell PowerConnect 8024F: Notas de lançamento (27 páginas), Manual de configuração (21 páginas), Manual de implementação (8 páginas), Atualização do Firmware (24 páginas)
Imprimir página
PowerConnect 8024/8024F Release Notes
Cable Diagnostics
Description
Time is reported as UTC and not
local time in log files and CLI for
copper ports.
Issues with show fiber-ports optical-
transceiver output.
Management ACL
Description
Management ACL is not working for
Out-Of-Band interface
SNTP
Description
Too many SNTP messages in log file.
User Manager
Description
A user that configures a User Level
15 and disables the RADIUS
authentication server may not be able
to login.
Page 18
User Impact
The times are not adjusted for the local time zone.
The port is enabled when the fiber diagnostics are run. Because of this,
the user sees the same diagnostics for both port up and down. There is
also an invalid value that shows in power out.
User Impact
Management ACLs are not implemented on the Out-Of-Band interface.
User Impact
The log can fill up with informational message of SNTP: system clock
synchronized. Change Log message from notice level to NTP debug
level in order to avoid the additional messages.
User Impact
When the radius server does not exist and the authentication fails, the
next authentication method is not getting invoked.
End of Release Notes
System Firmware Version 3.1.4.16