Dell PowerConnect B-RX4 Manual de instalação - Página 4

Procurar online ou descarregar pdf Manual de instalação para Interruptor Dell PowerConnect B-RX4. Dell PowerConnect B-RX4 17 páginas. Instant access point
Também para Dell PowerConnect B-RX4: Manual (10 páginas)

Imprimir página
The power LED will flash again within 15 seconds indicating that the reset is completed. The access point will
now continue to boot with the factory default settings.
Kensington Lock Slot
The access point is equipped with a Kensington security slot for additional security.

Before You Begin

CAUTION: FCC Statement—Improper termination of access points installed in the United States configured to non-US model
controllers will be in violation of the FCC grant of equipment authorization. Any such willful or intentional violation may result in a
requirement by the FCC for immediate termination of operation and may be subject to forfeiture (47 CFR 1.80).
CAUTION: EU Statement:
Lower power radio LAN product operating in 2.4 GHz and 5 GHz bands. Please refer to the Dell PowerConnect W-Series Dell
PowerConnect W-Instant 6.1.2.3-2.0.0.0 User Guide for details on restrictions.
Produit réseau local radio basse puissance operant dans la bande fréquence 2.4 GHz et 5 GHz. Merci de vous referrer au Dell
PowerConnect W-Series Dell PowerConnect W-Instant 6.1.2.3-2.0.0.0User Guide pour les details des restrictions.
Low Power FunkLAN Produkt, das im 2.4 GHz und im 5 GHz Band arbeitet. Weitere Informationen bezlüglich Einschränkungen
finden Sie im Dell PowerConnect W-Series Dell PowerConnect W-Instant 6.1.2.3-2.0.0.0 User Guide.
Apparati Radio LAN a bassa Potenza, operanti a 2.4 GHz e 5 GHz. Fare riferimento alla Dell PowerConnect W-Series Dell
PowerConnect W-Instant 6.1.2.3-2.0.0.0 User Guide per avere informazioni detagliate sulle restrizioni.

Pre-Installation Checklist

Before installing your access point, be sure that you have the following:
For the W-AP134—External antennas as specified in the network deployment plan
CAT5 or better UTP cable of required length
One of the following power sources:
IEEE 802.3at-compliant Power over Ethernet (PoE) source
The POE source can be any power source equipment (PSE)
Dell 12 power adapter kit (sold separately)
Summary of the Setup Process
NOTE: It is important that you verify the items listed under
AP.
Successful setup of an access point consists of five tasks, which must be performed in this order:
1. Verify pre-installation connectivity.
2. Identify the specific installation location for each AP.
3. Install each IAP.
4. Verify post-installation connectivity.
4
Pre-Installation Checklist
Dell PowerConnect W-IAP130 Series Instant Access Point | Installation Guide
before you attempt to set up and install an