Dell PowerConnect PC7024F Livro Branco Técnico - Página 11
Procurar online ou descarregar pdf Livro Branco Técnico para Interruptor Dell PowerConnect PC7024F. Dell PowerConnect PC7024F 34 páginas. Stacking gigabit ethernet switches
Também para Dell PowerConnect PC7024F: Instruções de empilhamento (37 páginas)
Imprimir página
Stacking Dell PowerConnect 7000 Series Switches
To configure the standby unit via the Web interface, view the Stacking > Unit Configuration page and
select Standby for the Unit Type.
Updating the Firmware on a Stack
Automatic Update
By default, firmware synchronization is performed automatically when a unit is powered up on a stack.
Because firmware synchronization makes no attempt to check for the latest version of firmware, the
following procedure is recommended for bringing all members of a stack onto the same version of
code.
NOTE: Schedule some downtime as this process will reset the entire stack and affect all stack users.
1. Use the following commands to enable firmware synchronization, if needed, and write the
running configuration to the saved configuration:
console#boot auto-copy-sw
console#copy nvram:config copy system:running-config nvram:startup-
config
2. Load the more recent firmware image onto the stack master as the backup image.
3. Set the stack master to reboot from the new image:
console#boot system backup
Page 9