Dell PowerConnect PC7024F Livro Branco Técnico - Página 22
Procurar online ou descarregar pdf Livro Branco Técnico para Interruptor Dell PowerConnect PC7024F. Dell PowerConnect PC7024F 34 páginas. Stacking gigabit ethernet switches
Também para Dell PowerConnect PC7024F: Instruções de empilhamento (37 páginas)
Imprimir página
Stacking Dell PowerConnect 7000 Series Switches
console#show switch
Management
Switch Status
------ ----------- ------------
1
Stack Mbr
2
Unassigned
3
Mgmt Switch
4
Stack Mbr
When the failed unit resumes normal operation, the previous configuration that exists for that unit is
reapplied by the master unit.
Scenario 2
Consider the same example with a four-unit stack connected in daisy-chain fashion.
Stack Split
Figure 4.
If the link between Switch 2 and Switch 3 is removed, the stack is split into two different stacks with
Switches 1 and 2 in one stack and Switches 3 and 4 in another.
The master unit for each stack is determined by the following criteria:
•
Switch 3 was configured as master prior to the split, so it will continue to be the
master unit for Stack 2 (units 3 and 4).
•
If Switch 2 is configured as the standby, it becomes the master for Stack 1 (units 1 and
2).
•
If none of the units in Stack 1 are configured as master or standby, then Stack 1 will
have no master after the split. The election process will start on these two units, and
either Switch 1 or Switch 2 will come up as a master based on which switch has the
highest base MAC address.
In this specific example, there will not be any change in the configuration in Stack 2. Stack 1 will come
up with the previously saved configuration on the new master elected.
Note that stack splits are less likely when the switches are cabled in a ring. For example, if Switch 4
was connected to Switch 1 and the link between Switch 2 and Switch 3 was removed, all switches
would remain members of the single stack with Switch 3 continuing as the master.
Standby
Preconfig Plugged-in
Status
Model ID
--------- ----------- ------------ --------
Standby
PCT7048
PCT7048
PCT7048
PCT7048
Switch 1
Switch 2
Standby
Switch 3
Switch 4
Switch
Model ID
Status
PCT7048
OK
Not Present
PCT7048
OK
PCT7048
OK
Switch 1
Switch 2
Switch 3
Switch 4
Code
Version
4.0.0.6
0.0.0.0
4.0.0.6
4.0.0.6
Stack 1
Master
Stack 2
Page 20