Dell PowerConnect W-AP105 Especificações - Página 2
Procurar online ou descarregar pdf Especificações para Interruptor Dell PowerConnect W-AP105. Dell PowerConnect W-AP105 4 páginas. Powerconnect w-ap104 and w-ap105 access points
Também para Dell PowerConnect W-AP105: Manual (10 páginas), Manual (45 páginas), Manual de instalação (2 páginas), Especificações (2 páginas), Especificações (2 páginas), Manual de instalação (2 páginas)
Imprimir página
Specifications
Operating modes
• Multiservice concurrent 802.11a/n + b/g/n WLAN
• Can be configured to operate individually or simultaneously as:
- 802.11a/b/g/n access point
- Air monitor, spectrum monitor
- Remote AP
- Secure enterprise mesh
• Backward compatible with 802.11a/b/g and mixed-mode
11a/b/g/n deployments
Radios
• Multifunction, dual radio capable of 2.4-GHz and 5-GHz
operation
• Both 802.11n radios implement 2x2 MIMO with two spatial
streams, providing up to 300 Mbps data rate per radio
• Maximal ratio combining (MRC) for improved receiver
performance
Wireless radio specifications
• Supported frequency bands (country-specific restrictions apply):
- 2.400 to 2.4835 GHz
- 5.150 to 5.250 GHz with Dynamic Frequency Selection
(DFS) capability
- 5.250 to 5.350 GHz with Dynamic Frequency Selection
(DFS) capability
- 5.470 to 5.725 GHz with Dynamic Frequency Selection
(DFS) capability
- 5.725 to 5.850 GHz with Dynamic Frequency Selection
(DFS) capability
• Available channels: Controller-managed, dependent upon con-
figured regulatory domain
• Transmit power:
- 2.4 GHz: Up to 23 dBm (limited by local regulatory
requirements)
- 5 GHz: Up to 23 dBm (limited by local regulatory
requirements)
- Transmit power configurable in increments of 0.5 dBm
• Supported radio technologies:
- 802.11b: Direct-sequence spread-spectrum (DSSS)
- 802.11a/g/n: Orthogonal frequency division multiplexing
(OFDM)
- 802.11n: 2x2 MIMO with 2 spatial streams
• Supported modulation types:
- 802.11b: BPSK, QPSK, CCK
- 802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
• Association rates (Mbps):
- 802.11b: 1, 2, 5.5, 11
- 802.11a/g: 6, 9, 12, 18, 24, 36, 48, 54
- 802.11n: MCS0 - MCS15 (6.5 Mbps to 300 Mbps)
- 802.11n high-throughput (HT) support: HT 20/40
- 802.11n packet aggregation: A-MPDU, A-MSDU
Antenna
• W-AP104:
- 4 x RP-SMA antenna interface connectors for external
antenna support. External Antenna selection guide is
available from Dell representative or downloadable from
Dell.com/wireless
• W-AP105:
- 4 x integrated, omni-directional antennas.
- Maximum antenna gain:
- 2.4GHz/2.5dBi
- 5GHz /4.0dBi
Interfaces
• Network:
- 1 x 10/100/1000Base-T Ethernet (RJ45), auto-sensing,
MDI/MDX
• Power:
- 1 x DC power connector
• Other:
- 1 x RJ45 console interface
Power options
• 48V DC 802.3af PoE or 802.3at PoE+
• External AC power providing 12V DC to AP (adapter sold
separately)
• Maximum power consumption: 12.5 watts
Mounting
• Ceiling tile rail (15/16" & 9/16" recessed or non-recessed)
• Desk stand and wall outlet mount plate
• Wall box mount bracket (for US single gang wall mount)
• Solid wall stand-off
Mechanical
• 132 mm x 135 mm x 45 mm (5.2" x 5.3" x 1.8")
• Weight: 300g (10.56 oz)
Certifications/Regulatory
• Wi-Fi certified: 802.11a/b/g/n
• FIPS/TAA certified SKU available
Product meets EMC, safety and wireless standards of over 50
countries inclusive of; USA (FCC), Canada, EU, Japan, Korea,
China. For more country-specific regulatory information, and
approvals, please see your Dell representative.
Minimum AOS version
• W-AP104: 6.1.3.0
• W-AP105: 5.0.2.0
Extended Life Warranty*
Dell_PowerConnect_WAP104_AP105 page 2