AVX AVX-SAT6 Manual do Proprietário - Página 6

Procurar online ou descarregar pdf Manual do Proprietário para Altifalantes AVX AVX-SAT6. AVX AVX-SAT6 6 páginas. 70v / 100v / 8 ohm outdoor landscape speakers

Imprimir página

Connecting the Amplifier and Testing

After connecting each loudspeaker to the wire run and setting the taps, attach the speaker wires to the

amplifier, (verify polarity is correct)

+ and – to –. Connect the amplifier to a source and power on the amplifier and test the system.

Listen to the system from several locations in the listening area. If an area is too loud or quiet, adjust

speaker

taps or the amplifier volume accordingly until the volume and sound quality is optimized. Check

speaker placement and ensure it correctly placed for on and off axis response.

After optimizing the settings, check the total wattage again to be sure the amp isn't being overworked. It is

good idea to let the system play for about a half hour after setup is done to be sure that the system is

reliable. CAUTION: If amplifier becomes extremely hot to the touch in a short period of time the settings

on the speaker are not correct.

Once the system has been set and tested, the wiring or conduit can be buried or hidden. For any issues with

operation or sound quality, please see the Troubleshooting section before contacting AVX for

additional support.

SPECIFICATIONS

Description

Impedance

Sensitivity(dB/m/w)

Frequency response

Power handling

Woofer

Tweeter

Connector

Cabinet

Dimensions

MEAS/G.W.

TROUBLESHOOTING

AVX loudspeakers are designed to function trouble-free. Most problems that occur are due to simple wiring

and setup issues. If you have trouble, please check the list of simple fixes below or contact one of our helpful

AVX support representatives at 877-302-8397.

No Sound

• Verify that there is an audio signal coming from the source selected. Select or connect another source if

necessary.

• Ensure that the audio source is turned on and connected properly.

making sure to mirror the wiring pattern used in the loudspeakers, + to

AVX-SAT 4

two way passive lawn speaker

8 ohms

83dB

80-20kHz

8Ω(40W RMS, 80W MAX)

70V(15W/10W/5W/2.5W)

100V(30W/20W/10W/5W)

1*4" woofer （Rubber surroud+IMPP cone） 1*6" woofer（Rubber surroud+IMPP cone）

0.75" aluminium dome tweeter

Flying Leads

PP with Matte paint finish

135.7mm Dia x 203.2mm Long

45*39*63cm/8pcs/17KG

AVX-SAT 6

two way passive lawn speaker

8 ohms

86dB

70-20kHz

8Ω(50W RMS, 100W MAX)

70V(15W/10W/5W/2.5W)

100V(30W/20W/10W/5W)

0.75" aluminium dome tweeter

Flying Leads

PP with Matte paint finish

179mm Dia x 257mm Long

51.5*51*36.5cm/4pcs/11.5KG