Dell PowerEdge 2550 Instruções de instalação do bastidor - Página 25

Procurar online ou descarregar pdf Instruções de instalação do bastidor para Interruptor Dell PowerEdge 2550. Dell PowerEdge 2550 40 páginas. Wake-on-lan (wol) support on dell servers
Também para Dell PowerEdge 2550: Manual de instalação (26 páginas), Manual de instalação (32 páginas), Manual de configuração (10 páginas), Manual de ativação (32 páginas), Manual de instalação (32 páginas), Manual (28 páginas), Manual (15 páginas)

Place one hand on the front-bottom of the system and the other hand on the back-

bottom of the system.

Tilt the system while aligning the back shoulder nuts on the sides of the system with

the back slots on the slide assemblies (see Figure 1-14).

Engage the back shoulder nuts in the slot just behind the back (green) latch first,

followed by the middle shoulder nut in the slot near the middle (yellow) latch. Finally,

engage the front shoulder nut in the front slot.

Push the system inward on the slide assemblies until the middle (yellow) latch clicks

into place, locking the slide to the middle shoulder nut (see Figure 1-14).

Release the locking latch at the back of the slide, and slide the system completely into

the rack and secure it using the captive fasteners at the lower edge of the front panel

(see Figure 1-15).

F i g u r e 1 - 1 5 . S e c u r i n g t h e S y s t e m i n t h e R a c k ( F l u s h - M o u n t

C o n f i g u r a t i o n )

captive screw (2)

Attach the front bezel, if you removed it.

Ra c k In s ta l lati on Gui de

1-19