Allied Telesis SwitchBlade AT-AR440S Manual de configuração - Página 3

Procurar online ou descarregar pdf Manual de configuração para Placa de rede Allied Telesis SwitchBlade AT-AR440S. Allied Telesis SwitchBlade AT-AR440S 11 páginas. For typical network scenarios
Também para Allied Telesis SwitchBlade AT-AR440S: Ficha de dados (1 páginas), Ficha de dados (5 páginas), Ficha de dados (3 páginas), Ficha de dados (3 páginas), Ficha de dados (2 páginas), Brochura (6 páginas)

Imprimir página
Allied Telesis SwitchBlade AT-AR440S Manual de configuração
Determining your ADSL connection parameters
The table below is provided for you to fill in the connection parameters for your ADSL Service
Provider and ISP. Typically, the provider will specify the parameters on the printed material that they
give you when you sign up for their service. But if you have not been given any such material, you
should contact your providers technical support help desks or Websites to determine their
requirements.
Table 1: ADSL technical requirements
Connection Parameters
Encapsulation
VPI
VCI
Connection type
(e.g. PPPoE0A, PPPoA or RFC 1483 routed)
Authentication
Login name and password
(if applicable)
Your static public IP address
(if applicable, otherwise you will have a
dynamically assigned address)
DNS Server IP addresses
(Some ISP's use PPP dynamic assignment to
automatically assign these addresses)
Note: Your router also has the typical connection settings for different countries pre-defined.
You can try setting the country using the router's Graphical User Interface (GUI), and then
verify if the ATM settings are correct for your service provider. If not, then the connection
settings can still be altered through the GUI. Details on using the GUI are shown later in this
document.
Set up your AT-AR440S ADSL Router for Typical Network Scenarios
AT -AR440S Default Values
(for country=none)
llc
0
35
PPPoA
Required values for your
ADSL Service provider
Primary server
Secondary server
3