Dell S3048-ON Manual de resolução de problemas - Página 14

Procurar online ou descarregar pdf Manual de resolução de problemas para Interruptor Dell S3048-ON. Dell S3048-ON 29 páginas. Enterprise switches

Imprimir página

Dell S3048-ON Manual de resolução de problemas

Example of the pcitool Configuation File Output

# more default_pci_list.cfg

Bus:Dev.Fn=00:00.0 ID=0c738086 NOT LISTED

0c738086 00000007 06000002 00000000 00000000 00000000 00000000 00000000

00000000 00000000 00000000 00008086 00000000 00000000 00000000 00000000

00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000

00000000 00000000 00000000 00000000 01080000 00000000 00020fb1 00000000

Bus:Dev.Fn=00:01.0 ID=0c468086 PCIe port

0c468086 00100147 06040002 00010010 ff760004 00000000 00010100 000000f0

...

i2ctool

The i2ctool allows testing of the devices on the i2c bus.

In EDA Quick Test mode, i2ctool scans busses and identifies all of the devices. If a device is behind a MUX, i2ctool looks for devices

through the MUX and, if present, a second-level MUX as well.

Example of the i2ctool Ouput

Syntax: ./i2ctool <option>

-h := show this help

test := test <user_i2c_file.cfg> the pre-programmed configuration

# ./i2ctool test userI2cFile.cfg

read := read I2C device with <bus> <dev> <address> <bytecount>

# ./i2ctool read /dev/i2c-0 0x50 0x00 10

write := write I2C device with

# ./i2ctool write /dev/i2c-0 0x50 0x00 0x0a 0x0b 0x0c

scan := scan <bus_prefix> the I2C devices on the specified bus prefix

# ./i2ctool scan /dev/i2c-

Example of the i2ctool Configuration File Output

# more gpio_00_i2c_devices.cfg

I2C devices found on bus #0: 10

Dev found @ 0x18,/dev/i2c-0,-,-,0x18,0x00,1

Dev found @ 0x30,/dev/i2c-0,-,-,0x30,0x00,1

Dev found @ 0x31,/dev/i2c-0,-,-,0x31,0x00,1

Dev found @ 0x32,/dev/i2c-0,-,-,0x32,0x00,1

Dev found @ 0x33,/dev/i2c-0,-,-,0x33,0x00,1

Dev found @ 0x3e,/dev/i2c-0,-,-,0x3e,0x00,1

Dev found @ 0x4d,/dev/i2c-0,-,-,0x4d,0x00,1

Dev found @ 0x50,/dev/i2c-0,-,-,0x50,0x00,1

Dev found @ 0x53,/dev/i2c-0,-,-,0x53,0x00,1

Dev found @ 0x69,/dev/i2c-0,-,-,0x69,0x00,1

I2C devices found on bus #1: 0

I2C devices found on bus #2: 2

Dev found @ 0x51,/dev/i2c-2,-,-,0x51,0x00,1

Dev found @ 0x59,/dev/i2c-2,-,-,0x59,0x00,1

memtool

The memory tool (memtool) tests system memory.

EDA Quick Test mode only completes simple access (read) tests. You can use memtool to test static memory areas, such as L2Cache

mapped as SRAM or DRAM on a memory mapped device.

ONIE diagnostics