Dell S3100 Series Manual de instalação - Página 33

Procurar online ou descarregar pdf Manual de instalação para Interruptor Dell S3100 Series. Dell S3100 Series 45 páginas.
Também para Dell S3100 Series: Manual de iniciação (46 páginas), Manual de iniciação (27 páginas)

Imprimir página
Dell S3100 Series Manual de instalação
Figure 25. 1U Tool-Less Configuration

Configuring a Two-Post Flush-Mount

To install your switch using a two-post flush-mount configuration, follow these steps.
1. For this configuration, remove the castings from the front side of each ReadyRails assembly. See item 1 in the following
illustration. To remove the two screws from each front flange ear (on the switch side of the rail) and remove each casting,
use a Torx driver. Retain the castings for future rack requirements. It is not necessary to remove the rear flange castings.
2. Attach one rail to the front post flange with two user-supplied screws. See item 2 in the following illustration.
3. Slide the plunger bracket forward against the vertical post and secure the plunger bracket to the post flange with two
user-supplied screws. See item 3 in the following illustration.
4. Repeat this procedure for the second rail.
Figure 26. Installing the Switch using a Two-Post Flush-Mount Configuration
Install a S3100 Series System
33