Dell S4048-ON Manual de configuração - Página 5

Procurar online ou descarregar pdf Manual de configuração para Interruptor Dell S4048-ON. Dell S4048-ON 19 páginas. Enterprise switches
Também para Dell S4048-ON: Manual de configuração (30 páginas), Manual de resolução de problemas (29 páginas)

Imprimir página

Introduction

This document illustrates how to configure Dell Networking S4048-ON switches for use with Dell™ PS

Series storage while using Dell best practices. The recommended configuration uses Link Aggregation

Groups (LAGs) for inter-switch connections. Optional steps are provided in section 3 to enable Data

Center Bridging (DCB) and for stack configurations.

If you are following the Rapid EqualLogic Configuration steps at

http://en.community.Dell.com/techcenter/storage/w/wiki/3615.rapid-equallogic-configuration-portal-

by-sis.aspx, use sections 1 and 2, or 1 and 5 in this Switch Configuration Guide.

For more information on PS Series SAN design recommendations, see the PS Series

at: www.Delltechcenter.com/page/equallogic+configuration+guide.

1.1

Document conventions

Table 1 lists the formatting conventions used in this document.

Table 1

Format

Bold

Italic

1.2

Audience

This switch configuration guide describes an optimal configuration following Dell best practices for a PS

Series iSCSI SAN and is intended for storage or network administrators and deployment personnel.

1.3

Switch details

Table 2 provides an overview of the switch configuration.

Table 2

Dell Networking S4048-ON

Switch vendor

Switch model

Switch firmware

SCG1026

Dell Networking S4048-ON Switch Configuration Guide for PS Series SANs

Document conventions

Description

User input

Placeholder or variable

Separate variables

Switch specifications

Dell

S4048-ON

9.8.0.0 or later

Example

Dell>enable

your password

Configuration Guide