EarthQuake AWS-502B Manual do proprietário e garantia - Página 5
Procurar online ou descarregar pdf Manual do proprietário e garantia para Altifalantes EarthQuake AWS-502B. EarthQuake AWS-502B 6 páginas.
Imprimir página
Installation
Volume and Power Handling limitations
The listed power recommendations assume you will operate your system in a
way that will not produce distortion (blow your speakers). Even these speakers
can be damaged by a modest amplifier if it is not operated properly. If you hear
distortion (harsh or crackling noise) your're over powering the speakers and
should immediately turn the volume down. Prolonged abuse caused by over
powering the speakers will cause permanent damage that may not be covered
by the Earthquake limited warranty.
Speaker Placement
Speaker location is one of the key factors for better sound quality. Taking your
time to place your speakers correctly ensures that your speakers will sound best
in any indoor or outdoor situation. Stereo sound is best heard when the
speakers are separated by at least 3-6ft. Usually placing speakers by a wall or
other surface will increase your bass response. Outdoors, placement under the
eaves of a roof reduces exposure to constant direct sunlight and precipitation,
which will extend the speaker life. Respect your neighbors; if you know that it will
affect your neighbors privacy face the speaker toward the intended listening
area to contain the amount of distance that the sound will travel.
8
Installation
Mounting the AWS speakers
Before you fasten all items down, you may want to test the placement of your
speakers to ensure that you are getting the best sound possible. Use the
supplied bracket to mount the speaker vertically or horizontally on your chosen
surface. The bracket offers multiple mounting options; key hole sockets and
standard screw holes the difference is usually based on the surface type(you
may want to consult with an installer regarding the proper hard ware to use).
To mount, remove the bracket from the enclosure. To make wire less noticeable
you can insert it from the surface through the hole in the bracket and into the
connections. Mount the bracket in a desired location, and fasten the speaker to
the bracket. Finally face the speaker in the direction where the sound will most
needed.
Earthquake also placed two 1/4"
threaded inserts on the back of the
speaker for alternative mounting
options. Some additional options
include floor stands, hanging devices
etc... These items can usually be
found at the dealer where you made
your purchase or any other audio
outlet.
If You Feel That the Speaker is Not Working
First contact the dealer where the speakers were originally purchased, if this is
not an option, you may contact the Earthquake service department;
510.732.1000. Products purchased on auction website or from unauthorized
Earthquake dealers will be charged shipping, labor and parts. Make sure you
protect your investment and buy from an authorized dealer.
www.earthquakesound.eu
9