AVZ Twins Piazzola Instruções de instalação - Página 8

Procurar online ou descarregar pdf Instruções de instalação para Acessórios AVZ Twins Piazzola. AVZ Twins Piazzola 20 páginas. Gastro awning

Assembly instructions Twins

Tensioning system assembly

1. Slide the clamping plate into the groove of the bottom profile with the holes facing the centre of the

profile.

2. Make sure that the sides of the clamping plate and the front profile are flush.

3. Draw the holes and drill holes of 9 mm. Do this on both sides of the front profile.

Attention: Do not drill in the holes of the clamping plate.

4. Using the drilling template, drill holes of 6,5 mm in the groove of the front profile. Maintain a distance

of around 50 cm between the holes. Keep a distance of around 70 cm in the centre of the front profile

and place the central pulley here.

Note: The distance of 70 cm gives the central pulley enough room to move during opening and

closing.

Piazzola

Butterfly awning

Twins Piazzola EN 27-08-2018

Page 8