EarthQuake Cinenova 7 Manual do utilizador - Página 11

Procurar online ou descarregar pdf Manual do utilizador para Amplificador EarthQuake Cinenova 7. EarthQuake Cinenova 7 20 páginas.

Cinénova Grande Power Amplifiers

Bridging Cinénova Grande BR 7 Channel to 5 Channels

The Cinénova Grande BR 7 Channel has six

channels that can be bridged to create three

channels. The seventh channel is always a stereo

channel and should always be set to "MASTER"

since it has no slave.

In order to bridge the first and second channels, the

first channel must be set to "MASTER" and the

second channel must be set to "SLAVE."

To bridge the third and fourth channels, the third

channel must be set to "MASTER" and the fourth

channel must be set to "SLAVE."

To bridge the fifth and sixth channels, the fifth

channel must be set to "MASTER" and the sixth

channel must be set to "SLAVE."

Applications

In the diagram to the right, a seven channel amplifier

has been bridged to create a five channel amplifier.

Though it is capable of bridging two more channels,

this bridging mode is applicable to more users.

www.earthquakesound.com

MASTER

SLAVE

MASTER

Minimum 8-Ohm

LEFT FRONT

Cinénova Grande BR Bridging Feature

SLAVE

MONO

Minimum 4-Ohm

REAR LEFT

Minimum 8-Ohm

RIGHT FRONT

MONO

Minimum 4-Ohm

CENTER

REAR RIGHT