360 BANDIT KINZE 3000 Manual de instruções de instalação - Página 5

Procurar online ou descarregar pdf Manual de instruções de instalação para Equipamento agrícola 360 BANDIT KINZE 3000. 360 BANDIT KINZE 3000 6 páginas.

Imprimir página
INSTALLATION INSTRUCTIONS
KINZE 3000
STEP 9
INSTALL DISK ASSEMBLY
26
28
27
25
29
25
Insert 5/8" X 3" bolt
25
through the disk
27
(large side first) and hose guide assembly
facing in).
Slide bolt of the disk assembly into the lower hole on the
bandit
25
, aligning the ear tab
29
with corresponding upper
hole and secure with lock nut.
Tighten with 15/16" socket and wrench.
Using a mallet, install provided dust caps over disk bolt
heads.
Route application hose through hole in top of 360 BANDIT
frame
.
30
Repeat for other side.
Using 15/16" socket and wrench, reinstall closing wheels.
NOTE: If the optional Chain Kit is being installed, do not
reinstall the closing wheels.
STEP 10
ASSEMBLE PLUMBING
23
29
30
26
. Insert bushing
Install orifice plates
28
(ear tab
29
Assemble pluming components in the arrangement shown
above
33
.
Attach the plumbing assembly to each of the hoses coming
from the house guides
NOTE: If hoses are not fully seated in the push to connect,
they will leak. Hoses seat 7/8" of an inch deep or until you
hear a snap.
The supplied push to connect adapter in the 360 BANDIT kit
connects to 3/8" push to connect compatible hose.
Secure hoses to row unit with provided zip ties.
32
32
34
34
31
in the rubber grommets
32
.
34
.
PAGE 5

INSTALLATION COMPLETE

PLUMBING RECOMMENDATIONS:
To prevent excess fertilizer from dribbling out of the hoses
when product application is shut off, install one push to
connect polypropylene (Inlet x Outlet) 3/8" O.D. check valve
(not included) in the plumbing to each row prior to the 360
BANDIT orifices. Check valve is available at Dultmeier Sales
(Item #BUCV1103-P38).
A 50 mesh strainer (not included) can be used in the
complete plumbing system between tanks and 360
BANDIT to help prevent debris from blocking orifices.