EarthQuaker Devices Pyramids Manual de operação - Página 5
Procurar online ou descarregar pdf Manual de operação para Equipamento de gravação EarthQuaker Devices Pyramids. EarthQuaker Devices Pyramids 5 páginas.
Imprimir página
In Live mode, the Activate LED is always green. When using a saved preset, the Activate LED
is yellow, and will change to red when a preset setting is changed. When saving a change to
a preset or writing an entirely new preset, the Activate LED will flash and turn yellow once the
change/preset has been saved. The Tap/Trigger LED is white and will flash in tempo regardless
if the tempo is set via the Rate control or the Tap/Trigger Footswitch. The Tap/Trigger LED is not
used in both Trigger up and down modes and will remain dark.
• Current Draw: 425mA
• For best results, please use the included 9v center-negative 1-amp DC power supply.
• To use with multiple output transformer-balanced isolated pedal-specific power supplies,
Pyramids' may be powered from two outlets combined using a current-doubling cable. DO NOT
USE A VOLTAGE-DOUBLING CABLE BECAUSE THAT WILL SEND 18V TO PYRAMIDS
AND FRY IT LIKE AN OVEREASY EGG AT A GREAZY SPOON DINER.
• 24-bit 96kHz A/D & D/A converters
• S/N Ratio: 115dB typical
• Input Impedance: 1M Ohm
• Output Impedance: 100 Ohm
• All analog dry signal path
• All digital wet signal path with
20Hz – 20kHz frequency response
This Device has a limited lifetime warranty. If it breaks, we will fix it. Should you encounter any
issues, please email [email protected].
<<< LED Behavior >>>
<<< Power Requirements >>>
<<< Tech Specs >>>
<<< Warranty >>>
www.earthquakerdevices.com
©2018 EarthQuaker Devices LLC
• PCBs populated by a combination of artificial
and human intelligence in the Akron, Ohio
of America.
• Each and every Pyramids is completely
assembled, wired, and tested by total human
beans in the Great Sphinx of Akron, Ohio,
which, coincidentally, looks exactly like the
cover of Iron Maiden's Powerslave.