EarthWay 2170-XL Manual de instruções de montagem - Página 7
Procurar online ou descarregar pdf Manual de instruções de montagem para Espalhador EarthWay 2170-XL. EarthWay 2170-XL 10 páginas. Commercial broadcast spreader with side spread control
Imprimir páginaAssembly and Operation Instructions
CALIBRATION
Pull lever back to setting "30" as
Step 15:
shown. Next push pivot & bracket forward so
that the shut off plate in the hopper is in the full
open position. REMEMBER SETTING "30" ON
THE FLOW CONTROL LEVER MUST PLACE THE
SHUT-OFF PLATE IN THE FULL OPEN POSITION
TO BE PROPERLY CALIBRATED. Now tighten the
nuts against the PIVOT BRACKET to prevent
change in calibration.
NOTE: Tension on the flow control lever may
be adjusted by tightening or loosening the
tension nut as shown.
Insert agitator to pinion shaft on
Step 16:
inside of hopper.
Note: the position of flat side of the agitator.
This pin should be installed as shown.
2170_M52164_RevJune2021
PAGE 7