Christie CP4230 Folha de instruções - Página 3

Procurar online ou descarregar pdf Folha de instruções para Racks & Stands Christie CP4230. Christie CP4230 6 páginas. Christie rack mount pedestal
Também para Christie CP4230: Folha de instruções (10 páginas), Boletim Técnico (6 páginas), Boletim Técnico (8 páginas), Manual de configuração (3 páginas), Manual de instalação e configuração (19 páginas)

7. Loosen the anode clamp screw and remove the clamp from the lamp.

8. Hold the anode end of the lamp with your left hand and carefully unscrew and remove the

cathode nut with your right hand.

9. Unscrew the lamp from the cathode clamp.

10. Hold the anode end of the lamp and carefully guide the lamp through the reflector without

contacting the reflector.

11. With your right hand, guide the cathode end out of the reflector, on an angle, through the lamp

access door

12. Open a protective lamp case and place the lamp into the case. Thread the cathode nut onto the

lamp, close the protective case, and place the case in a location where it cannot fall or be

bumped.

13. Remove your protective clothing and face shield.

Widen the Cathode Clamp

1. Inspect the cathode clamp for damage.

If the cathode clamp is damaged, contact Christie Digital and request a replacement.

2. Reach into the projector and remove the cathode screw (A) from the cathode clamp (B) with a

1/8" Allen key.

Widen a Cathode Clamp Instruction Sheet

020-101328-01 Rev. 1 (01-2014)

Handle the protective case carefully. The lamp is hazardous even when it is

enclosed in a protective case. Failure to comply could result in death or

serious injury.

Widen a Cathode Clamp Instruction Sheet