Miele PWM 920 DD Plano de instalações - Página 11
Procurar online ou descarregar pdf Plano de instalações para Máquina de lavar roupa Miele PWM 920 DD. Miele PWM 920 DD 34 páginas. Commercial washing machine
Imprimir página
XKM RS232 com-
munication mod-
ule
Hard-water kit
(APWM062)
Plinth (UO/UG)
Vapor and suds
venting kit
(APWM 063)
When the peak-load function is activated the current program is
stopped and a message appears in the display on the washing ma-
chine. The program is resumed automatically when the peak-load
system reactivates the heating.
The serial interface RS-232 can be retrofitted to the washing machine
via an XKM RS 232 (optional accessory available from Miele). This
communication module must only be used with Miele Profes-
sional machines that are fitted with an appropriate slot for the mod-
ule.
The data interface provided via communication module
XKM RS232 complies with SELV (Safety Extra Low Voltage) in ac-
cordance with EN 60950.
Machines connected to this interface must also be SELV compliant.
Communication module XKM RS 232 is supplied with a connection
cable and a D-sub-connector.
The hard-water connection on the washing machine can be retrofitted
with the optional hard-water kit (APWM062).
The additional water connection allows hard water to be used and
the program runtime will therefore be reduced. In addition, hard wa-
ter is particularly suitable for the final rinse cycles.
The machine can be installed on a machine base (open or box base,
available as an optional Miele accessory).
Elevating the washing machine gives a better ergonomic working
position when loading or unloading. At the same time it facilitates
the installation of a drain connection.
The washing machine must be secured to the base immediately
after installation! The base must be secured to the floor!
There is a risk of the washing machine falling off a raised base dur-
ing a spin cycle if it is not secured.
If excessive suds form, suds may escape from the vapor vent. The
optional vapor and suds venting kit (BWS) can be used to remove the
suds.
en - Installation and planning notes
11