Miele WS 5071 Manual de Instruções - Página 34

Procurar online ou descarregar pdf Manual de Instruções para Máquina de lavar roupa Miele WS 5071. Miele WS 5071 36 páginas. Washer-extractor

Notes for the installer

Electrical connection

All electrical work must be carried out by a

suitably competent person in compliance with

national and local regulations.

Please take note of the Installation diagram

and the Wiring diagram. They are important

for electrical connection.

The electrical safety of this machine is in ac-

cordance with IEC 335.

The minimum suds level required for activat-

ing the heating is 45 mm column of water

The voltage and frequency are given on the

data plate. The machine must only be con-

nected if these match the mains supply.

The motor is fitted with an overload protection

switch.

For extra safety it is advisable to install a re-

sidual current device with a trip current of 30

mA (in accordance with DIN VDE 0664, VDE

0100, Section 739).

When switched off there must be an all-pole

contact gap in the isolator switch (including

switch, fuses and relays according to VDE

0660).

Nominal rated load and fuse rating are given

on the data plate. Ensure that these are com-

patible with the electricity supply.

WARNING

THIS APPLIANCE MUST BE EARTHED

Connection should be made via a suitable iso-

lator which complies with national and local

regulations, and the on/off switch should be

easily accessible for servicing work.

When installation and connection have

been completed all removable outer pa-

nels must be re-fitted before the machine

is operated.

M.-Nr. 05616270