Miele Dishwasher Cuidados e manutenção - Página 32

Procurar online ou descarregar pdf Cuidados e manutenção para Máquina de lavar loiça Miele Dishwasher. Miele Dishwasher 44 páginas.

Technical Information

The reactivation of the softener and provision of soft water are automatically

controlled by the dishwasher in various ways as follows:

1. Time-controlled reactivation (models with time-controlled

Reactivation is only carried out when the softening capacity of the water

softener has been exhausted.

Warning!

With Plus, Plus-2, Plus-3, Plus-4 and G 1xxx/G 2xxx series models with

sensor softener (SEH) installed in a household with a domestic water softener

system, the following must be observed:

As the domestic water softener system is already supplying soft water, the

conductivity of which will only be slightly modified by the dishwasher water

softener, the sensor softener must be deactivated. The water hardness level

must then be set manually (depending on manufacturer and system generally

between 6 and 8 gr/gal).

If this is not carried out, the pauses between individual reactivation cycles will

be shorter. There is also an increased risk of glass corrosion, as with an

incoming water hardness level incorrectly measured by the sensor softener (in

this case a level that is too high), much too little incoming water will be mixed

with the water softened in the dishwasher, which can lead to a water hardness

level in the cabinet of less than 1 gr/gal.

water intake):

Using a multistage selector switch, the customer can set the

machine to suit the hardness of the on-site water supply (the

local water supply company can be requested to provide

information regarding water hardness). Depending on the

setting, after every dishwashing program a certain quantity of

salt is released for softener reactivation.

2. Consumption-linked reactivation (models with flow-meter-

controlled water intake):