Miele G 2 Series Manual - Página 40

Procurar online ou descarregar pdf Manual para Máquina de lavar loiça Miele G 2 Series. Miele G 2 Series 46 páginas.
Também para Miele G 2 Series: Manual (14 páginas)

Imprimir página

Technical Information

Options:

Function

Reset

Setting the language

Setting the time of day

Setting the detergent type

Dispensed rinse aid

quantity setting

Setting the intervals for

the filter checks

Adjust Sensor wash

program

Changing the main menu

Save extras

Programming

Select Reset. To restore the

standard settings, select OK.

To return to the main menu,

press Back.

Select Language.

Select a language and

confirm with OK.

Select Time and confirm

with OK. Choose 12 h Clock

or 24 h Clock and confirm

with OK. Then set the time

(seconds, then minutes)

using the cursor buttons and

confirm with OK.

Select Detergent type.

Select a detergent type and

confirm with OK.

Select Rinse aid. Select a

rinse aid quantity with the +,

- buttons and confirm with

OK.

Select Check filters. Select

a wash interval and confirm

with OK.

Select Adjust sensor wash.

Select a setting and confirm

with OK.

Select Change main menu.

Use the cursor buttons to

mark the program that is to

be replaced, then press OK.

Then use the cursor buttons

to select the program that is

to replace the removed

program. After all changes

have been made, confirm

with OK and return to the

main menu.

Select Save extras. Select a

setting and confirm with OK.

G 1xxx/G 2xxx

Display

The display reads Reset standard

settings?

The display lists the languages that

can be selected. A language must

be selected in order to return to the

main menu.

Display of both clock formats,

followed by entry request.

The display shows the selection of

available detergent types: Normal

(powder detergent), 2 in 1 and

Combi-tabs.

The display shows the current rinse

aid dispensing quantities: The

dispensed quantity can be set from

0 to 0.2 fl.oz. (0 - 6 mL). Standard

setting: 0.1 fl.oz. (3mL).

The display shows the intervals

available for selection. Range: 30 -

60 wash cycles.

Setting options On and Off

(standard setting). With this

parameter, Sensor wash can be

adjusted for use against stubborn

stains (if overall soiling is

moderate). If this option is selected,

the main wash temperature is

raised to 131°F, resulting in an

extended running time.

The display shows the programs

available. The order of the first

three can be modified. After fixing

and confirming a new order, the list

is shown again.

This function is activated in the

standard settings. In the display,

this is signaled with the message

On. If you do not wish to save,

select Off.