Miele G 2120 Manual - Página 37

Procurar online ou descarregar pdf Manual para Máquina de lavar loiça Miele G 2120. Miele G 2120 46 páginas.
Também para Miele G 2120: Manual (14 páginas)

G 1xxx/G 2xxx
Function
Reset
Setting the language
Setting the time of day
Format
Set manually
Setting the detergent type
Dispensed rinse aid
quantity setting
Setting the intervals for
the filter checks
Adjust Sensor wash
1
program
Changing the main menu
Programming
Select Reset. To restore
the standard settings,
select OK. To return to the
main menu, press Back.
Select Language.
Select a language and
confirm with OK.
Select Time of day.
Select a submenu and
confirm with OK.
Choose 24- or 12-hour
setup and confirm with
OK.
Set the time (seconds,
then minutes) using the +
and - buttons and confirm
with OK.
Select Detergent type.
Select a detergent type
and confirm with OK.
Select Rinse aid. Select a
rinse aid quantity with the
+ and - buttons and
confirm with OK.
Select Check filters.
Select a wash interval and
confirm with OK.
Select Adjust sensor
wash. Select a setting and
confirm with OK.
Select Change main
menu. Select a wash
program for position 1,
press Continue, and do
exactly the same for
positions 2 and 3. After all
changes have been made,
confirm with Finished and
return to the main menu.
37
Technical Information
Display
The display reads Reset factory
default settings?
The display lists the languages that
can be selected. A language must
be selected in order to return to the
main menu.
The submenus Format and Set
manually can be selected.
Display of both clock formats.
Entry request is indicated.
The display shows the selection of
available detergent types: Normal
(powder detergent), 2 in 1, 3 in 1,
and Liquid detergent.
The display shows the current rinse
aid dispensing quantities: The
dispensed quantity can be set at
levels of approximately 0 - 0.2 fl.oz.
(0 - 6 mL). Standard setting: 0.1
fl.oz. (3mL).
The display shows the intervals
available for selection. Range: 30 -
60 wash cycles.
Setting options On and Off
(standard setting). With this
parameter, Sensor wash can be
adjusted for use against stubborn
stains (if overall soiling is
moderate). If this option is selected,
the main wash temperature is
raised to 131°F, resulting in an
extended running time.
The display shows the programs
available. The order of the first
three can be modified. After fixing
and confirming a new order, the list
is shown again.