Miele G 643 Manual de instruções de instalação - Página 26

Procurar online ou descarregar pdf Manual de instruções de instalação para Máquina de lavar loiça Miele G 643. Miele G 643 40 páginas. Integrated dishwasher
Também para Miele G 643: Manual de instruções de instalação (28 páginas), Manual de instruções de instalação (28 páginas), Manual de instruções de instalação (40 páginas)

An air gap is built into the water inlet

system to prevent potable water from

mixing with waste water.

The dishwasher can heat its own water

to the temperatures required by the

wash program. This allows the option of

connecting the machine to either a hot

or cold water source.

^ For lowest energy consumption

connect the dishwasher to a cold

water source.

^ For fastest possible wash times, with

slightly higher energy consumption,

connect the dishwasher to a hot

water source.

Recommended temperature:

120 °F (49 °C)

max 140 °F (60 °C)

Must be between 5 - 145 psi

(0.3 -10 bar).

If the water pressure is too low, the

"Intake/Drain" or "Intake" indicator may

flash (see "Operating Instructions/

Frequently asked questions").

If the water pressure is too high, a

pressure reducer must be installed.

The water inlet hose comes equipped

with a

" female hose thread con-

nector. This can be directly connected

to a shut off valve with

hose thread ends).

The hose assembly should be installed

vertically so the hose exits from the

bottom of the valve box (not as shown).

If this is not possible, it can be installed

horizontally, provided the hose exit

remains beneath the main body of the

valve box (see illustration). The valve

box should also be installed so that it is

at least 10" (24 cm) above the floor (or

base of the cabinet), so that the excess

coiled hose will remain lower than the

valve box at all points.

" MHT (male